Manufacturers

JTC

Model Item Name Price
JTC-4881
JTC-4881 VW, AUDI HOSE CLAMP PLIERS (CURVED)

JTC-4881 VW, AUDI HOSE CLAMP PLIERS (CURVED)

Special large clamp designed for lower water hose clamp. Max clamp capacity:  55mm Larger handle for easier removing the hard clamp. Applicable:...
RM630.00
Add:
JTC-4882
JTC-4882 FUEL HOSE CLIP PLIERS FOR VW/AUDI

JTC-4882 FUEL HOSE CLIP PLIERS FOR VW/AUDI

The VW, Audi fuel hose clip pliers is used on three-ended hose clip which are fitted on the fuel line. Clamp capacity: 18 – 28 mm. Application:...
RM126.00
Add:
JTC-4883
JTC-4883 VW. AUDI DIESEL INJECTOR REMOVER

JTC-4883 VW. AUDI DIESEL INJECTOR REMOVER

Specially designed to remove the seized diesel injector from VAG TDi engines. Always allow to cool down the engine before using the tool. ...
RM414.00
Add:
JTC-4892
JTC-4892 FUEL PEDAL REMOVER FOR VW/AUDI

JTC-4892 FUEL PEDAL REMOVER FOR VW/AUDI

The VW, Audi fuel pedal remover is specially designed to push out the lock of the fuel pedal for removal or replacement of the new pedal....
RM72.00
Add:
JTC-4905
JTC-4905 VW, AUDI FRONT CROSSMEMBER ALIGNMENT TESTING MANDREL

JTC-4905 VW, AUDI FRONT CROSSMEMBER ALIGNMENT TESTING MANDREL

Before loosening subframe, use the special tool to check whether 4 holes are aligned. If they do not, you must perform wheel alignment after the...
RM240.00
Add:
JTC-4921
JTC-4921 7-SPEED DSG MECHATRONIC UNIT REMOVER FOR VW/AUDI

JTC-4921 7-SPEED DSG MECHATRONIC UNIT REMOVER FOR VW/AUDI

The VW, Audi 7-speed DSG mechatronic unit remover is specially designed to remove load from the plungers of mechatronic unit when inserting the tool...
RM145.00
Add:
JTC-4928
JTC-4928 VW, AUDI TIMING TOOL SET (3.2 FSI)

JTC-4928 VW, AUDI TIMING TOOL SET (3.2 FSI)

Special designed set of tools for alignment camshaft locking, and adjusting. Applicable: VAG A4/ A6/ A8 3.2 FSI with engine AUK, A6L/...
RM1,180.00
Add:
JTC-4930
JTC-4930 VW DIESEL ENGINE TIMING TOOL SET- BELT

JTC-4930 VW DIESEL ENGINE TIMING TOOL SET- BELT

Special designed set of tools for camshaft locking, and adjusting. Applicable: VW-Transporter, LT, Crafter Engines: 2.4D, 2.5SDI, 2.5TDI, 2.5TDI...
RM525.00
Add:
JTC-4931
JTC-4931 VW DIESEL ENGINE TIMING TOOL SET- CHAIN

JTC-4931 VW DIESEL ENGINE TIMING TOOL SET- CHAIN

For removing and installing camshaft drive gear and eliminating play in gear train - for locking of both camshafts and crankshaft Applicable:...
RM2,832.00
Add:
JTC-5459
JTC-5459 DAF CRANKSHAFT FRONT OIL SEAL INSTALLER (CF)

JTC-5459 DAF CRANKSHAFT FRONT OIL SEAL INSTALLER (CF)

Model : JTC-5459 DAF CRANKSHAFT FRONT OIL SEAL INSTALLER (CF) Features :  • Use for installing the front oil seal of the crankshaft,...
RM12.00
Add:

Who's Online

There currently are 248 guests online.
Your IP Address is: 18.188.191.218
Copyright © 2024 Techno Tools*** About Us***mobile link***Desktop link