Manufacturers

VW & AUDI TOOL

Model Item Name Price
JTC-4847
JTC-4847 VW, AUDI TIMING TOOL SET (2.0FSI)

JTC-4847 VW, AUDI TIMING TOOL SET (2.0FSI)

 • With camshaft tools, chain tensioner retainer, locking pins and tensioner bolt. • For 2.0 FSI petrol engines since 2003. •...
RM430.00
Add:
JTC-4853
JTC-4853 VW BUSH REMOVER / INSTALLER (POLO)

JTC-4853 VW BUSH REMOVER / INSTALLER (POLO)

Suitable for VW Polo (9N) front-axle bracket wishbone silent blocs. The removal and replacement of the silent bloc placed in bracket is   ...
RM700.00
Add:
JTC-4854
JTC-4854 VW, AUDI BUSH REMOVER / INSTALLER

JTC-4854 VW, AUDI BUSH REMOVER / INSTALLER

Special design to remove and install the bush. Applicable: VAG series.
RM325.00
Add:
JTC-4879
JTC-4879 SPARK PLUG CABLE PULLER FOR VW/AUDI

JTC-4879 SPARK PLUG CABLE PULLER FOR VW/AUDI

The spark plug cable puller is used for removing and installing the spark plug connectors. The spark plug socket remover for new Beetle and cars with...
RM108.00
Add:
JTC-4881
JTC-4881 VW, AUDI HOSE CLAMP PLIERS (CURVED)

JTC-4881 VW, AUDI HOSE CLAMP PLIERS (CURVED)

Special large clamp designed for lower water hose clamp. Max clamp capacity:  55mm Larger handle for easier removing the hard clamp. Applicable:...
RM630.00
Add:
JTC-4882
JTC-4882 FUEL HOSE CLIP PLIERS FOR VW/AUDI

JTC-4882 FUEL HOSE CLIP PLIERS FOR VW/AUDI

The VW, Audi fuel hose clip pliers is used on three-ended hose clip which are fitted on the fuel line. Clamp capacity: 18 – 28 mm. Application:...
RM126.00
Add:
JTC-4883
JTC-4883 VW. AUDI DIESEL INJECTOR REMOVER

JTC-4883 VW. AUDI DIESEL INJECTOR REMOVER

Specially designed to remove the seized diesel injector from VAG TDi engines. Always allow to cool down the engine before using the tool. ...
RM414.00
Add:
JTC-4892
JTC-4892 FUEL PEDAL REMOVER FOR VW/AUDI

JTC-4892 FUEL PEDAL REMOVER FOR VW/AUDI

The VW, Audi fuel pedal remover is specially designed to push out the lock of the fuel pedal for removal or replacement of the new pedal....
RM72.00
Add:
JTC-4905
JTC-4905 VW, AUDI FRONT CROSSMEMBER ALIGNMENT TESTING MANDREL

JTC-4905 VW, AUDI FRONT CROSSMEMBER ALIGNMENT TESTING MANDREL

Before loosening subframe, use the special tool to check whether 4 holes are aligned. If they do not, you must perform wheel alignment after the...
RM240.00
Add:
JTC-4921
JTC-4921 7-SPEED DSG MECHATRONIC UNIT REMOVER FOR VW/AUDI

JTC-4921 7-SPEED DSG MECHATRONIC UNIT REMOVER FOR VW/AUDI

The VW, Audi 7-speed DSG mechatronic unit remover is specially designed to remove load from the plungers of mechatronic unit when inserting the tool...
RM145.00
Add:

Who's Online

There currently are 815 guests online.
Your IP Address is: 18.226.226.158
Copyright © 2024 Techno Tools*** About Us***mobile link***Desktop link