Manufacturers

4" 2-JAW DOUBLE ENDED MECHANICAL PULLER

  • Model: KEN-503-3040K
  • Shipping Weight: 0.792kg
  • Manufactured by: KENNEDY

RM139.50

Add to Cart:
Model : KEN5033040K 
Mechanical Bearing Pullers - 2 Jaw

Industrial reversible / double-ended adjustable pullers.
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. 
With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external 
applications. 
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

All pullers can be assembled for internal or external use.
2 Jaw Pullers - Supplied with both 2-legged yoke
2 Jaw -Internal Assembly
2 Jaw -External Assembly
 

Specification

Property Value
Brand Kennedy
EAN13 Barcode 5036140007413
eCl@ss Code 21043090
Overall Depth 31
Overall Length 157
Overall Weight 0.792
Overall Width 148
Product Number MP2100 [-]
Reach 70 mm
Spread 50 - 100 mm
Supplier Part No. 5033040K
Thread Length 160 mm
UNSPSC Code 27111712

Further Information

Property Value
Capacity 50 to 100 mm millimetre in. inch
Maximum Diameter mm millimetre
Product Number MP2100
Product Type Puller
Reach 70 mm millimetre
Spread 50 - 100 mm millimetre
Thread Length 160 mm millimetre
To Suit  
Weight Each 0.792 kg kilogram
Number of Pieces 1
Includes Tool Only
Minimum Diameter mm millimetre
Additional Features Can be assembled for internal or external use
Supplied with 2-legged yoke
Number of Jaws 2
Jaw Reach 70 mm millimetre
 
 

This product was added to our catalog on Monday 17 May, 2010.

Who's Online

There currently are 227 guests online.
Your IP Address is: 18.188.110.150
Copyright © 2024 Techno Tools*** About Us***mobile link***Desktop link