Manufacturers

KENNEDY

Model Item Name Price
KEN-539-3590K
"G" CLAMP ADAPTOR KEN5393590K

"G" CLAMP ADAPTOR KEN5393590K

KEN5393590K G-Clamp Adaptor For use with all conventional G-Clamps. Acts as a 'third arm' allowing many clamping set-ups not normally...
RM93.20
... more info
Sold Out
KEN-300-5000K
'KENNEDY SMILE DIAL'PLUNGER TYPE DIAL GAUGE JEWELLED KEN3005000K

'KENNEDY SMILE DIAL'PLUNGER TYPE DIAL GAUGE JEWELLED KEN3005000K

KENNEDY SMILE DIAL'PLUNGER TYPE DIAL GAUGE JEWELLED KEN3005000K Smile Dial Gauges Plunger Type 58mm (21/4") Diameter Dial Matt finish...
RM314.00
Add:
KEN-601-0010K
.028" A/F HEXAGON WRENCH KEN6010010K

.028" A/F HEXAGON WRENCH KEN6010010K

Model : .028" A/F HEXAGON WRENCH KEN6010010K Hexagon Key L-Wrenches: Inch - Standard Length Inch - Standard Length Manufactured from fully...
RM1.60
Add:
KEN-601-0020K
.035" A/F HEXAGON WRENCH KEN6010020K

.035" A/F HEXAGON WRENCH KEN6010020K

Model : .035" A/F HEXAGON WRENCH KEN6010020K Hexagon Key L-Wrenches: Inch - Standard Length Inch - Standard Length Manufactured from fully...
RM142.00
Add:
KEN-601-0030K
.050" A/F HEXAGON WRENCH KEN6010030K

.050" A/F HEXAGON WRENCH KEN6010030K

Model : .050" A/F HEXAGON WRENCH KEN6010030K Hexagon Key L-Wrenches: Inch - Standard Length Inch - Standard Length Manufactured from fully...
RM83.00
Add:
KEN-558-8610K
0-100mm LOCKING C-CLAMP

0-100mm LOCKING C-CLAMP

ITEM DISCONTINUED KENNEDY KEN5588610K Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot.
RM219.60
... more info
Sold Out
KEN-558-9440K
0-100mm LOCKING C-CLAMP

0-100mm LOCKING C-CLAMP

KENNEDY KEN5589440K Locking C-Clamp's Chrome Vanadium c-clamp with a wide and deep jaw profile. Clears obstacles to firmly clamp sections....
RM169.00
Add:
KEN-558-8480K
0-100mm SELF-LEVELLING GRIP WRENCH

0-100mm SELF-LEVELLING GRIP WRENCH

KEN5588480K. Self Levelling Grip Wrenches The two knurled swivel pads ensure fully flat contact with the workpiece at the clamping point. Suitable...
RM289.00
Add:
KEN-558-8740K
0-100mm SPINDLE CLAMP

0-100mm SPINDLE CLAMP

KEN5588740K. Spindle Clamps Fine spindle clamping adjustment enables accurate clamping. Swivel joint clamping points allow tapered surfaces to be...
RM517.00
Add:
KEN-558-8160K
0-100mm TABLE C-CLAMP

0-100mm TABLE C-CLAMP

KEN5588160K Table C Clamp Five holes in base to allow fixture to work surface as a permanent clamp. Swivel foot to clamp tapered workpieces. Quick...
RM450.00
Add:

Monthly Specials For April

Airbrush compressor kit AS18K-2
Airbrush compressor kit AS18K-2
RM630.00  RM380.00
Save: 40% off
3M 9105 V-Flex N95
3M 9105 V-Flex N95
RM168.00  RM138.00
Save: 18% off
PELICAN Pelilite 1800C
PELICAN Pelilite 1800C
RM195.00  RM165.75
Save: 15% off
Airbrush holder Airbrush Stand
Airbrush holder Airbrush Stand
RM50.00  RM36.00
Save: 28% off
Airbrush compressor kit with airbrush AS189AK
Airbrush compressor kit with airbrush AS189AK
RM830.00  RM599.00
Save: 28% off
Hioki 3280-10F Clamp On Hitester
Hioki 3280-10F Clamp On Hitester
RM400.00  RM380.00
Save: 5% off
PELICAN Headsup Lite 2600C
PELICAN Headsup Lite 2600C
RM293.00  RM199.00
Save: 32% off
RT-5998 1" AIR IMPACT WRENCH RT-5998
RT-5998 1" AIR IMPACT WRENCH RT-5998
RM1,490.00  RM1,299.00
Save: 13% off
Makita Cordless Vacuum Pump 18V, 50L/min, 20Pa,DVP180RT
Makita Cordless Vacuum Pump 18V, 50L/min, 20Pa,DVP180RT
RM3,000.00  RM2,280.00
Save: 24% off

Who's Online

There currently are 225 guests online.
Your IP Address is: 18.116.118.244
Copyright © 2024 Techno Tools*** About Us***mobile link***Desktop link