Model : K-1500B SE 230V 50HZ
Sectional Drain Cleaning Machine for 2 in. to 8 in. Drain and Sewer Lines, with Low-Profile B-Frame Assembly, 1 1/4 in. C-11 Cable
(105 ft. Total), and A-34-15 Rear Guide Hose, 230V
Brand: |
RIDGID |
Model No: |
K-1500B 230V w/C-11 |
Our Model No: |
27597 |
The RIDGID K-1500B 230V w/C-11 Sectional Drain Cleaning Machine for 2 in. to 8 in. Drain and Sewer Lines, with Low-Profile B-Frame Assembly, 1 1/4 in. C-11 Cable (105 ft. Total), and A-34-15 Rear Guide Hose (230V) is designed for cleaning 2" to 8" drain and sewer lines. The machine is driven by an induction motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor.
The K-1500B machine is designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed 710 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.
The K-1500B machine comes equipped to run 1 1/4" cable to clean 3" to 8" lines to 200 ft. It can be easily adapted to use 7/8" cable to clean 2" to 4" lines up to 175 feet.
Product Features:
- Designed for cleaning 2 in. to 8 in. drain and sewer lines
- Single user can easily clean the heaviest blockages indoors or outside
- High-speed cleaning gets the job done faster and better
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at constant 710 RPM
- Release handle, cable stops instantly
- Easily wheels to the job site, sets up quickly, and cleans up fast
- Low-profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily
- Equipped to run 15-ft sections of 1 1/4" cable to clean 3" to 8" lines to 200 feet
- Easy clutch jaw change-out adapts machine to run 15-ft sections of 7/8" cable (sold separately) through 2" to 4" lines up to 175 feet
- Equipped with 3/4 HP motor
- Voltage: 230V
Included :
- 1 - 230V Sectional Drain Cleaning Machine on B-Frame Assembly
- 1 - Seven Sections of 1 1/4" C-11 Cable (105 ft. total)
- 2 - A-8 Cable Carriers
- 1 - 9-Piece 1 1/4" Tool Set:
- 1 - T-1 Straight Auger
- 1 - T-3 Funnel Auger
- 1 - T-6 Retrieving Auger
- 1 - T-8 Grease Cutter
- 1 - T-13 Sawtooth Cutter
- 1 - T-50-1 Sharktooth Cutter
- 1 - A-2864 Hex Key
- 1 - A-3516 Hex Key
- 1 - A-3 Tool Box
- 1 - A-34-15 Rear Guide Hose, 15 ft. Long
- 1 - A-12 Pin Key
- 1 - Drain Cleaning Mitt
This product was added to our catalog on Wednesday 14 April, 2010.