Model : KEN5033240K 

Mechanical Bearing Pullers - 2/3 Jaw

Industrial reversible / double-ended adjustable pullers.
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm.
All sizes have double-ended, adjustable, reversible legs and can be used for internal and external applications. 
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part.
Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

All pullers can be assembled for internal or external use.

Combined 2+3 Jaw Pullers - '4-in-1'
Supplied with 2 and 3-legged yokes and 3 leg assemblies - allowing the pullers to be configured in 2 jaw internal / external or 3 jaw 
internal / external assemblies.

Specification

Property	Value
Brand	Kennedy
EAN13 Barcode	5036140003903
eCl@ss Code	21043090
Overall Depth	30
Overall Length	365
Overall Weight	1.29
Overall Width	210
Reach	100 mm
Spread	40 - 87 mm
Supplier Part No.	5033240K
Thread Length	100 mm
UNSPSC Code	27111712

Further Information

Property	Value
Capacity	50 to 100 mm millimetre in. inch
Maximum Diameter	mm millimetre
Product Number
Product Type	Puller
Reach	70 mm millimetre
Spread	50 - 100 mm millimetre
Thread Length	160 mm millimetre
To Suit
Weight Each	1.29 kg kilogram
Number of Pieces	1
Includes	1 x 2-legged yoke 1 x 3-legged yoke 1 x thrust bolt 3 x leg assemblies
Minimum Diameter	mm millimetre
Additional Features	Can be used for internal and external applications Double-ended, adjustable, reversible legs
Number of Jaws	2 3
Jaw Reach	70 mm millimetre