Model : KEN5033140K 

 

Mechanical Bearing Pullers - 3 Jaw

Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm. 
All sizes have double-ended, adjustable, reversible legs and 
can be used for internal and external applications. 

Selection 
Always use a three jaw puller whenever 
possible. This produces better load 
distribution across the jaws and easier 
and safer removal of the part. Determine 
what 'spread' is needed - this is the width 
of the part to be removed. The reach 
capacity is determined by the 
depth of the part to be removed.

All pullers can be assembled for internal or external use.

3 Jaw Pullers - Supplied with both 3-legged yoke

3 Jaw - Internal Assembly
3 Jaw -External Assembly

Specification

Property	Value
Brand	Kennedy
EAN13 Barcode	5036140007451
eCl@ss Code	21043090
Overall Depth	72
Overall Length	161
Overall Weight	1.1
Overall Width	90
Product Number	MP3100 [-]
Reach	70 mm
Spread	50 - 100 mm
Supplier Part No.	5033140K
Thread Length	160 mm
UNSPSC Code	27111712

Further Information

Property	Value
Capacity	50 to 100 mm millimetre in. inch
Maximum Diameter	mm millimetre
Product Number	MP3100
Product Type	Puller
Reach	70 mm millimetre
Spread	50 - 100 mm millimetre
Thread Length	160 mm millimetre
To Suit
Weight Each	1.1 kg kilogram
Number of Pieces	1
Includes	Tool Only
Minimum Diameter	mm millimetre
Additional Features	Can be assembled for internal or external use Supplied with 3-legged yoke
Number of Jaws	3
Jaw Reach	70 mm millimetre