Hioki 3255-50 Digital Hitester

larger image

RM964.30

Add to Cart:

Hioki 3255-50 Feature :-

Easily Measure Current with a Clamp Sensor

· Built-in with Current-Limiting Resistor and 1000 V Withstanding Fuse to Prevent Short-Circuit Accidents

· Polarized terminal design prevents incorrect insertion of test leads

· Dust-proof and splash-proof structure prevents dust and moisture from entering the product (IP54)

· Measure AC load current with optional Clamp On Probes

Hioki 3255-50 Specification

Basic specifications (Accuracy guaranteed for 1 year)

DC Voltage range	419.9 mV to 1000 V, 5 ranges, Basic accuracy: ±0.5% rdg. ±4dgt.
AC Voltage range	419.9 mV to 1000V, 5 ranges, Basic accuracy: ±1.2% rdg. ±4 dgt., (Average rectified)
Resistance	419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±0.7% rdg. ±4 dgt.
AC Current 50 to 500Hz	Use with optional Clamp-on probes Display the actual current value by scaling the sensor's 0.2 VAC f.s. output. Basic accuracy: ±2.0 % rdg. ±4 dgt. plus clamp-on probe's accuracy
Continuity buzzer	Threshold 50 Ω ± 40 Ω or less, Open terminal voltage: 3.4 V or less
Diode check	Open terminal voltage: 3.4 V or less, Testing current 850 μA or less
Auto power save	Yes (Cancel possible)
Display	Digital LCD, max. 4199 digits
Sampling rate	2.5 times/sec
Other functions	Auto power save, Auto hold
Protection rating	IP 54 (EN 60529)
Protection structure	Protected against internal short-circuit with protective resistor (5 Ω current-limiting resistor) and built-in 0.44 A fuse (1000 VAC/10 kA interrupting capacity)
Power supply	Manganese batteries (R03) ×2, Continuous use: 200 hours Alkaline batteries (LR03) ×2, Continuous use: 500 hours
Dimensions, mass	70 mm (2.76 in) W × 145 mm (5.71 in) H × 31 mm (1.22 in) D, 210g (7.4 oz) (including batteries)
Supplied accessories	Test Lead×1, Holster ×1, Instruction Manual ×1, Manganese batteries (R03) ×2 (for trial purposes only), CARRYING CASE 9371 ×1